Your shopping cart is empty!
Categories
-
All Part Types
- - Belts
- - Bobbin Cases
- - Bobbin Cover Plates
- - Bobbin Winders
- - Bobbins
- - Cushions (feet)
- - Darning Plates
- - Electrical Parts
- - Extension Tables
- - Feed Cover Plates
- - Feed Dogs
- - Foot Controls
- - Gears and Pulleys
- - Hand Wheels and Clutches
- - Light Bulbs and Sockets
- - Manuals
- - Miscellaneous
- - Motors
- - Needle Clamps and Bars
- - Needle Plates
- - Needles
- - Notions and Accessories
- - Power Cords
- - Presser Feet
- - Pulleys
- - Screws
- - Serger Knives
- - Serger Loopers
- - Serger Needle Plates
- - Serger Needles
- - Shuttle Hooks
- - Slide Plate Springs
- - Slide Plates
- - Spool Pins and Caps
- - Tensions
- - Winder Rings
- Machine Brand
-
Vintage Parts
- - Belts
- - Bobbin Cases
- - Bobbin Winder Rings
- - Bobbin Winders
- - Bobbins
- - Electrical Parts
- - Feed Dogs
- - Foot Controls
- - Hand Wheels and Clutches
- - Light Bulbs and Sockets
- - Manuals
- - Miscellaneous
- - Motors
- - Needle Clamps and Bars
- - Needle Plates
- - Needles
- - Notions and Accessories
- - Power Cords
- - Presser Feet
- - Screws
- - Shuttle Hooks
- - Tensions
Presser Feet Low Vertical Snap-On Type "B" Presser Feet sewing machine parts
This new style snap-on shank will allow your machine to accept a wide variety of pressure feet. It can also be used as a replacement for conventional one-piece feet measuring approximately 3/4" high. All the presser feet in this category are for 3/4" low shank "low vertical."
Slides into top portion of foot 5011-1. Can be used in either direction. For guiding uniform quilt l..
$2.95
Used to stablize botton when using zig-zag to sew on buttons.Alternate Part Numbers006914008, 5011-9..
$4.95
For low vertical machines, use in straight stitch ONLY. 1/4" quilting foot with black guide on righ..
$14.95
For precise stitch placement on blind-hems.Alternate Part Numbers006904008, 357990, SA133, XC1957-00..
$8.95
Narrow Zipper / Cording Foot for getting close to the work. Your machine MUST have a left and right..
$3.95
Singer general sewing presser foot. Fits ALL "B" snap-on systems including the Inspiration 4220, 42..
$8.95
Snap-on stitch guide foot offers up to a one inch seam guide.Alternate Part NumbersSA160, X51804001,..
$12.95
Center needle position machines ONLY. For straight sewing ONLY. Gives lighter fabrics better stabi..
$3.95
Left needle machines ONLY. For straight stitch ONLY. Gives lighter fabrics better stability and co..
$3.95
Snap-on wide 1/4" edge stitching foot with black right built in edge guide. Black guide is 1/4" fro..
$14.95
Sews left and right side.Alternate Part Numbers006905008, 357992, 5011-10, X59370-051..
$2.95
When using a satin stitch this foot is grooved out on the underside for better feed and fabric contr..
$4.95
Fits new style "B" type shank for Brother model XR46, XL6562, XL6452 and others. Standard zig-zag f..
$6.95
Fits "Bns" shank above. When you encounter a seam that is too thick, press the black button on the ..
$7.95
New style "B" shank. FITS ALL LOW VERTICAL machines. Uses ALL "B" feet. Use in c..
$12.95
Powered By OpenCart
Discount Sewing Machine Parts © 2024
Discount Sewing Machine Parts © 2024